Product Details
The hydraulic system and lubrication system have extremely high requirements for the particulate matter and water content in hydraulic oil and transmission oil. Excessive particles and moisture will degrade the performance of lubricants, leading to a series of issues such as gear wear, pitting corrosion, bearing failure, and sticking of hydraulic cylinder pumps/valves.
Therefore, hydraulic filters play a critically important role throughout the entire process by maintaining oil cleanliness and preventing contamination-related failures.
Our product is a microglass fiber medium, which laminates PET non-woven on both sides, with either single layer or gradient layers available. It’s suitable for a variety of liquid. Our products satisfy ISO 16889 and ISO 4548-12. It features
Robust dual phase materials with high dust holding capacity
Low pressure drop and high strength
Single phase/ dual phase/ single layer/ multi layer
Lower basic weight, thinner media, more filtration area
Full synthetic for long service interval
| Product code | Composition | Basis weight (g/㎡) | Thickness (mm) | Multi-pass efficiency β(C)200 (5.0 l/min)(%) | DHC by multi-pass (5.0l/min) | PMI mean flow pore size (um) | Details |
| FB0201H | PET double side | 107 | 0.41 | 1-3 | 70 | 2.4 | More » |
| FB0601H | PET double side | 107 | 0.42 | 5-8 | 73 | 6.3 | More » |
| FB1001H | PET double side | 107 | 0.42 | 10 | 80 | 11.3 | More » |
| FB2001H | PET double side | 107 | 0.42 | 20 | 113 | 19.3 | More » |
| FB3001H | PET double side | 108 | 0.45 | 30 | 172 | 29 | More » |
| FB4001H | PET double side | 108 | 0.46 | 40 | 210 | 38 | More » |
| FB1001HG | PET double side-gradient glass layers | 139 | 0.58 | 11.3 | 166 | 9.7 | More » |
| FB0601HG | PET double side-gradient glass layers | 140 | 0.58 | 5.5 | 153 | 5.8 | More » |
Cost
Area used
Basis weight
Scrap rate
Processing speed
Emissions control
